Re: dump devices

From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Fri Apr 16 2004 - 08:46:55 EDT

Actually no - and I've not used it before. I'll check it out.

BV
--------------------------------------------------------

"If everything is coming your way, then you are in the wrong lane"

Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax

             "Green, Simon"
             <Simon.Green@EU.A
             LTRIA.COM> To
             Sent by: IBM AIX aix-l@Princeton.EDU
             Discussion List cc
             <aix-l@Princeton.
             EDU> Subject
                                       Re: dump devices

             04/16/2004 04:13
             AM

             Please respond to
                  IBM AIX
              Discussion List
             <aix-l@Princeton.
                   EDU>

Are you using the "-P" flag on the sysdumpdev command?
e.g. sysdumpdev -P -p /dev/hd71; sysdumpdev -P -s /dev/hd72 

--
Simon Green
Altria ITSC Europe Ltd
AIX-L Archive at https://new-lists.princeton.edu/listserv/aix-l.html
New to AIX? http://publib-b.boulder.ibm.com/redbooks.nsf/portals/UNIX
N.B. Unsolicited email from vendors will not be appreciated.
Please post all follow-ups to the list.
> -----Original Message-----
> From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
> Sent: 14 April 2004 21:27
> To: aix-l@Princeton.EDU
> Subject: dump devices
>
>
> I have an AIX 5.1 R50 that for some reason resets my dump devices to
> "/dev/hd6" and the second is "-" (not even sysdumpnull) when it boots.
>
> Any suggestions ?

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:50 EDT