From: Jan-Frode Myklebust (janfrode@PARALLAB.UIB.NO)
Date: Sat Apr 10 2004 - 11:05:06 EDT
On Sat, Apr 10, 2004 at 10:48:50PM +0800, cuihh cuihh wrote:
> what's the problem with the pdisk ?
> 7133 D-40, contain 16 ssa disks
> When i use "lsdev -Cc pdisk" to see the location about each pdisk, the
> output was:
> name status location description
> pdisk0 Available 10-70-P SSA160 Physical Disk Drive
> Note that the location of the pdisk0 was a bit strange, what does "10-70-P"
I've seen this same kind of output when I've had dead ssa-disks. Try:
ssaidentify -l pdisk0 -y
to see if you can turn on the identification ligth. I suspect you're
going to get a 'hardware error'-message when running this command.
Report it to IBM, and get the disk replaced.
-jf
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:49 EDT