From: Rod Jenkins (RodJ@IOWATELECOM.COM)
Date: Tue Jul 16 2002 - 11:18:07 EDT
We have been fighting a similar issue. One of the things that led us to our
solution was looking at out-of-order packets on the destination machine.
put from a to b
on b:
netstat -s | grep out-
We found we had a bad layer 3 switch.
Rod.
-----Original Message-----
From: Jolet, John [mailto:John.Jolet@misyshealthcare.com]
Sent: Friday, July 12, 2002 11:47 AM
To: aix-l@Princeton.EDU
Subject: transfer problem
Okay, here's an odd one. I've got an H50 that is acting funny....for
instance...i transferred a 26gig file TO it in 3 minutes. To transfer that
file FROM it...well, scp was estimating over an hour. What do I look at
first? it can receive fine, but not transmit?
To fully qualify the program....file transmitted from machine a to b took 3
minuts. from b to c stopped it at 15, 20% done. From a to c 4
minutes...from b to d 2 minutes....from c to b, 2 minutes...pulling from b
to c (scp from c, but with source on b) same result as pushing from b to
c...pulling from b to a...37 seconds.
Why can this machine not transmit properly to that ONE box? but can receive
from that box just fine?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:04 EDT