replacing a mirrored disk for non-rootvg volume group

From: Caldwell, Michelle (Michelle.Caldwell@AVNET.COM)
Date: Mon Jul 15 2002 - 15:02:03 EDT

• Next message: AIX geek: "Disable CPUs"
• Previous message: Wesley Joyce: "High system usage"
• Next in thread: Green, Simon: "Re: replacing a mirrored disk for non-rootvg volume group"
• Maybe reply: Green, Simon: "Re: replacing a mirrored disk for non-rootvg volume group"
• Maybe reply: jim kastner: "Re: replacing a mirrored disk for non-rootvg volume group"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I am looking for a paper on IBM's website which tells me the simple steps to
recover from a failed disk with mirrored logical volumes within a volume
group. The volume group consists of 3 disks. All these disks are attached
to a SCSI raid controller which was setup with Raid 0 Stripping. So, what
we did was stripe on hardware and mirror in AIX. Can anyone help with a
white paper or step by step instructions to handled the mirrored lvm, reduce
the vg, replace the disk for a non-rootvg volume group?

Thank You

Michelle Caldwell
AVNET TECenter
Solutions Consultant
480-794-2743

• Next message: AIX geek: "Disable CPUs"
• Previous message: Wesley Joyce: "High system usage"
• Next in thread: Green, Simon: "Re: replacing a mirrored disk for non-rootvg volume group"
• Maybe reply: Green, Simon: "Re: replacing a mirrored disk for non-rootvg volume group"
• Maybe reply: jim kastner: "Re: replacing a mirrored disk for non-rootvg volume group"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:03 EDT