From: Sajjad S Hashimi (sajjad@US.IBM.COM)
Date: Mon Jul 08 2002 - 16:27:28 EDT
What happens when you run diag?
I dont think hdisk11 even exists (for whatever reasons ??) when you are
running extendvg.. Maybe it is in defined state who knows...
Try running extendvg on say.. hdisk100 (or just makeup some #) you will get
the
same error.
Try lspv & see if hdisk11 is there..most likely it wont. Then
also try lsdev -Cc disk... See if it is in 'defined' state & go from there.
Hope this helps a little
Sajjad S. Hashimi
Chuck Lam
<chuck_lam@YAHOO. To: aix-l@Princeton.EDU
COM> cc:
Sent by: IBM AIX Subject: Problem adding a hdisk to a volume group
Discussion List
<aix-l@Princeton.
EDU>
07/08/2002 02:06
PM
Please respond to
IBM AIX
Discussion List
M80 running AIX 4.3.3
I was trying to add hdisk11 to a volume group. I am
getting the following error:
0516-024 hdisk11: Unable to open physical volume.
Either PV was not configured or could not be
opened. Run diagnostics.
0516-792 extendvg: Unable to extend volume group.
However, I was able to add another hdisk(hdisk16) in
the same pack to this volume group without any
problem.
I did 'rmdev -dl hdisk11' and ran 'cfgmgr'. I
received the same error when I ran 'extendvg vgname
hdisk11'.
Any ideas, TIA
__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:02 EDT