From: Nguyen, Andy (Andy.Nguyen@BELLSOUTH.COM)
Date: Fri Jun 28 2002 - 15:23:48 EDT
Hi Bill,
I am not sure if the B80s support the /usr/lpp/diagnostics/bin/uesensor command. If they do, I think you can find out the number of power supplies in those machines by running that command.
Andy
-----Original Message-----
From: Bill Verzal [mailto:Bill_Verzal@BCBSIL.COM]
Sent: Friday, June 28, 2002 1:57 PM
To: aix-l@Princeton.EDU
Subject: B80 power supplies
Hi *,
I have several B80's here and mgmt has request that I confirm the # of
power supplies in each one. Is there any AIX or diag routing I can use to
accomplish this ?
I see pmc0 in diag and lscfg - does this indicate a single power supply in
this particular unit ? Would I see a pmc1 in a dual-power supply machine ?
Thanks, Bill
-----------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
**************************************************************************************************************************************************
"The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential, proprietary, and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers."
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:01 EDT