From: Vesna Vranesic (vesna.vranesic@RZB.AT)
Date: Thu Jun 27 2002 - 10:18:07 EDT
where are your swap spaces (sysdumpdev -l) ?
Dave.Zarnoch@SUNGARD.COM@Princeton.EDU am 27.06.2002 15:49:19
Bitte antworten an aix-l@princeton.edu@inet
Gesendet von: aix-l@Princeton.EDU
An: aix-l@Princeton.EDU
Kopie:
Thema: Re: Problems with paging space
grep -e hd6 -e paging /sbin/rc.boot
# Start paging if no dump
[ ! -f /needcopydump ] && swapon /dev/hd6
# Don't configure the secondary dump device if it's a paging space
# other than hd6.
# Note: The primary should be hd6 if it's a paging space.
# See if it's a paging space other than hd6
if [[ -n "$dev" && "$dev" != "hd6" ]]
then # Check for paging space.
then # secondary is paging, don't set it now.
lsvg -l rootvg
LV NAME TYPE LPs PPs PVs LV STATE MOUNT POINT
hd5 boot 1 2 2 closed/syncd N/A
lv00 jfs 96 192 2 open/syncd /scs
hd8 jfslog 1 1 1 open/syncd N/A
hd4 jfs 16 32 2 open/syncd /
hd2 jfs 63 126 2 open/syncd /usr
hd9var jfs 8 16 2 open/syncd /var
hd3 jfs 16 32 2 open/syncd /tmp
hd1 jfs 32 64 2 open/syncd /home
paging02 paging 128 256 2 open/syncd N/A
Also:
Here's my /etc/swapspaces file:
paging02:
dev = /dev/paging02
paging00:
dev = /dev/paging00
paging01:
dev = /dev/paging01
Here's what's in alog:
Activating all paging spaces
0517-072 swapon: Cannot activate paging device /dev/paging02.
: The requested resource is busy.
swapon: Paging device /dev/paging00 activated.
swapon: Paging device /dev/paging01 activated.
The error is the same one that I get when I try "swapon -a"
Thanks!
DaveZ
Holger.VanKoll@SW
ISSCOM.COM To: aix-l@Princeton.EDU
Sent by: IBM AIX cc:
Discussion List Subject: Re: Problems with
paging space
<aix-l@Princeton.
EDU>
06/27/2002 09:31
AM
Please respond to
IBM AIX
Discussion List
pls post
grep -e hd6 -e paging /sbin/rc.boot
lsvg -l rootvg
there is nothing in errpt or console/bootlog? (smitty alog)
> -----Original Message-----
> From: Dave.Zarnoch@SUNGARD.COM [mailto:Dave.Zarnoch@SUNGARD.COM]
> Sent: Donnerstag, 27. Juni 2002 15:19
> To: aix-l@Princeton.EDU
> Subject: Re: Problems with paging space
>
>
> Soooo..
>
> If the paging space is on rootvg and all is mirrored.
>
> Why won't the paging space activate?
>
> Thanks!
>
> DaveZ
>
>
>
>
>
> Holger.VanKoll@SW
> ISSCOM.COM To:
> aix-l@Princeton.EDU
> Sent by: IBM AIX cc:
> Discussion List Subject: Re:
> Problems with paging space
> <aix-l@Princeton.
> EDU>
>
>
> 06/27/2002 08:24
> AM
> Please respond to
> IBM AIX
> Discussion List
>
>
>
>
>
>
> I did not check either. Maybe its updated.
>
> I just read the release notes 2 days ago:
>
> If you wish to do rootvg mirroring, use mirrorvg to setup the
> mirroring and
> unmirrovg to remove the mirroring. With these two commands,
> the limitations
> on rootvg mirroring have been removed. The white paper "Mirroring the
> rootvg Volume Group for AIX 4" is therefore no longer valid
> with AIX 4.3
> and should not be followed.
>
> http://publib.boulder.ibm.com/pseries/aixgen/relnotes/10069709.htm
>
> Btw. I read it cause I wanted to know how to find out which
> new commands
> are introduced by a maintenance-level.
> I asked this here in another thread... no response yet. F.e.
> lsmcode (afair
> ML08) is quite useful... maybe there are more useful new commands.
>
>
> > -----Original Message-----
> > From: Green, Simon [mailto:SGreen@KRAFTEUROPE.COM]
> > Sent: Donnerstag, 27. Juni 2002 13:58
> > To: aix-l@Princeton.EDU
> > Subject: Re: Problems with paging space
> >
> >
> > I must confess I didn't check, but I thought the article had
> > been updated.
> > Apologies for any confusion.
> >
> > Simon Green
> > Philip Morris ITSC Europe
> >
> > AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
> > AIX FAQ at http://www.faqs.org/faqs/aix-faq/
> >
> > N.B. Unsolicited email from vendors will seldom be appreciated.
> >
> > > -----Original Message-----
> > > From: Holger.VanKoll@SWISSCOM.COM
> > [mailto:Holger.VanKoll@SWISSCOM.COM]
> > > Sent: 27 June 2002 12:43
> > > To: aix-l@Princeton.EDU
> > > Subject: Re: Problems with paging space
> > >
> > >
> > > > There are two articles which should interest you: one on
> > > > rootvg mirroring
> > >
> > > AIX (install-)readme states this document is no longer valid
> > > as the restrictions its based on are no longer valid.
> > >
> > > Simply use mirrorvg rootvg.
> > >
> >
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:01 EDT