From: Leonardo Velloso Heitor (lheitor@BR.IBM.COM)
Date: Tue Jun 25 2002 - 13:56:42 EDT
Hello all,
I had the same problem when I updated my SP2 from AIX 4.3.2 to AIX
4.3.3-ML10 in a sigle update_all task, from my LPPSource with AIX433( with
all 4 CDs) and ML10( with 3 CDs).
I had NFS problem( Messages below), that was fixed using
BOS.NET.NFS.CLIENT.4.3.3.83.
Messages:
mount: 1831-008 giving up on:
vmount: A system call received a parameter that is not valid
I also had a problem with LVM( messages below), that was fixed with
BOS.RTE.LVM.4.3.3.82.
Messages:
# migratepv hdisk1 hdisk0
0516-078 lmigratelv: Incomplete device driver configuration. Probable
cause is the special file for the VG is missing. Execute
varyoffvg followed by varyonvg to build correct environment.
0516-812 migratepv: Warning, migratepv did not completely succeed;
all physical partitions have not been moved off the PV.
# mkps -s 1 rootvg
0516-094 lcreatelv: The operating system version of this node is not
compatible with another node in the cluster. This command cannot be
executed in concurrent mode in this situation.
0516-822 mklv: Unable to create logical volume.
0517-051 mkps: Cannot make paging space.
______________________________________________________________
Leonardo Velloso Heitor
ERP - Technical Support Team
mailto: lheitor@br.ibm.com
---------------------- Forwarded by Leonardo Velloso Heitor/Brazil/IBM on
06/25/2002 02:20 PM ---------------------------
Holger.VanKoll@SWISSCOM.COM@Princeton.EDU> on 06/25/2002 09:59:29 AM
Please respond to IBM AIX Discussion List <aix-l@Princeton.EDU>
Sent by: IBM AIX Discussion List <aix-l@Princeton.EDU>
To: aix-l@Princeton.EDU
cc:
Subject: Re: ML10 experiences
Hello,
I installed ML10 on 27 nodes this weekend, no problems.
1 CWS with PSSP3.1.1
26 Nodes with oracle 8.1.7.2 and db2 7.1 and 7.2 and some 3rd party apps.
I also migrated one node from 4.2.1 to 4.3.3-10; on this node I had
nfs-problems but they were gone after installing bos.net.nfs.client
4.3.3.83 .
Looks pretty good; anyway, I am still interested in any experiences
regarding ML10.
Regards, Holger
> -----Original Message-----
> From: bill.thompson@goodyear.com [mailto:bill.thompson@goodyear.com]
> Sent: Freitag, 14. Juni 2002 13:53
> To: AIX-L@pucc.Princeton.EDU
> Cc: Van Koll Holger, IT-DCS-SES-UN
> Subject: Re: ML10 experiences
>
>
> Holger,
>
> I recently reformatted and reinstalled AIX 4.3.3 from scratch
> followed by
> the ML 10 upgrade on an S7A. The install and upgrade went
> very smoothly and
> I've not run into any glitches yet. ML 10 looks pretty solid
> from my view
> point however the only thing we're running on this server is TSM.
>
> Bill Thompson
> Sr UNIX Systems Administrator
> The Goodyear Tire & Rubber Co.
>
> Contains Confidential and/or Proprietary Information
> May Not Be Copied or Disseminated Without Express Consent of
> The Goodyear
> Tire & Rubber Company.
>
> AIX-L Archives: http://marc.theaimsgroup.com/?l=aix-;&r=1&w=2
>
>
> ----- Original Message -----
> From: <Holger.VanKoll@SWISSCOM.COM>
> Newsgroups: bit.listserv.aix-l
> To: <aix-l@Princeton.EDU>
> Sent: Friday, June 14, 2002 5:59 AM
> Subject: ML10 experiences
>
> > Hello Aixlers,
> >
> > did anybody install ML10?
> >
> > I would be interested in any comments... like "went fine on
> a node that
> runs oracle x.y" "screwed up thing xy" "fine, but take care
> of..." etc.
> >
> > Thanks+regards,
> >
> > Holger
>
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:00 EDT