From: Holger.VanKoll@SWISSCOM.COM
Date: Fri Jun 21 2002 - 10:37:11 EDT
it wont hurt but might help to add -d to both tar-commands
> -----Original Message-----
> From: Vincent D'Antonio [mailto:Vincent.D'Antonio@BISYS.COM]
> Sent: Freitag, 21. Juni 2002 16:26
> To: aix-l@Princeton.EDU
> Subject: Re: System Migration
>
>
> If going to the new system you have the need for more disk
> space, I would
> re-create all my VG's, LV's and filesystems, take this opp to
> fix or move
> or add any VG, LV, and FS. once all this is done I used this
> command to
> transfer all data from one system to the other:
>
> tar -cf - <file or dir name> | rsh <hostname> `cd <dir name>;
> tar -xpf -`
>
> you should do this as root and have a .rhost in roots home on
> both systems.
> This command will also save your owner and permission settings.
>
> or if you have sysback you can use that.
>
> HTH
> Vince
>
> *******PLEASE NOTE NEW ADDRESS AND PHONE************
> --------------------------------------------------------------
> -------------------------------------------
>
> Vincent D'Antonio
> Unix Systems Engineer
> Bisys Retirement Services
> 200 Dryden Road
> Dresher, PA 19025
>
> phone: 215-648-8284
> fax: 215-648-4888
> e-mail: Vincent.D'Antonio@bisys.com
>
>
>
>
>
> Robert Elliott
> <elliott@LORMAN.A To:
> aix-l@Princeton.EDU
> LCORN.EDU> cc:
> Sent by: IBM AIX Subject:
> System Migration
> Discussion List
> <aix-l@Princeton.
> EDU>
>
>
> 06/21/2002 09:48
> AM
> Please respond to
> IBM AIX
> Discussion List
>
>
>
>
>
>
>
> Hi,
> I am soliciting all comments on a general plan to migrate an
> AIX 4.3.3
> machine to another physical RISC machine.
> Machine A has about 10 VG's and 30 PV's. Machine B is a new
> box. What is
> necessary to get Machine A up and running on machine B?
> General steps.
> Thanks in advance.
>
> Robert
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:00 EDT