From: Holger.VanKoll@SWISSCOM.COM
Date: Thu Jun 20 2002 - 10:30:47 EDT
from aix4.3 install-tips
Missing 4330-10 Maintenance Level information
The oslevel command may not indicate that the 4330-10 Recommended
Maintenance Level is installed even after updating from the 4/2002 Update
CD. This only occurs on systems that are newly installed from the 4/2002
level of the AIX 4.3.3 installation media. This problem is fixed in the
4.3.3.79 (and later) levels of bos.rte.install, which can be obtained by
ordering APAR IY29131.
> -----Original Message-----
> From: Zbyszek Borgosz [mailto:zbyszek@SUN.COMPUTERLAND.PL]
> Sent: Donnerstag, 20. Juni 2002 16:17
> To: aix-l@Princeton.EDU
> Subject: Re: ML10 experiences
>
>
> the strange thing happend to me is, when I upgraded to ML10(smitty
> update_all), the instfix -i | grep AIX_ML showed me ML_9...
> he he.
>
> %> -----Original Message-----
> %> From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]
> %> On Behalf Of Bill Thompson
> %> Sent: Friday, June 14, 2002 1:53 PM
> %> To: aix-l@Princeton.EDU
> %> Subject: Re: ML10 experiences
> %>
> %>
> %> Holger,
> %>
> %> I recently reformatted and reinstalled AIX 4.3.3 from
> %> scratch followed by the ML 10 upgrade on an S7A. The install
> %> and upgrade went very smoothly and I've not run into any
> %> glitches yet. ML 10 looks pretty solid from my view point
> %> however the only thing we're running on this server is TSM.
> %>
> %> Bill Thompson
> %> Sr UNIX Systems Administrator
> %> The Goodyear Tire & Rubber Co.
> %>
> %> Contains Confidential and/or Proprietary Information
> %> May Not Be Copied or Disseminated Without Express Consent of
> %> The Goodyear Tire & Rubber Company.
> %>
> %> AIX-L Archives: http://marc.theaimsgroup.com/?l=aix-;&r=1&w=2
> %>
> %>
> %> ----- Original Message -----
> %> From: <Holger.VanKoll@SWISSCOM.COM>
> %> Newsgroups: bit.listserv.aix-l
> %> To: <aix-l@Princeton.EDU>
> %> Sent: Friday, June 14, 2002 5:59 AM
> %> Subject: ML10 experiences
> %>
> %> > Hello Aixlers,
> %> >
> %> > did anybody install ML10?
> %> >
> %> > I would be interested in any comments... like "went fine
> on a node
> %> > that
> %> runs oracle x.y" "screwed up thing xy" "fine, but take care
> %> of..." etc.
> %> >
> %> > Thanks+regards,
> %> >
> %> > Holger
> %>
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:00 EDT