From: Dilton Dantas de Oliveira (dilton@POP-SE.RNP.BR)
Date: Thu Jun 20 2002 - 07:56:33 EDT
Hi,
____________________
Holger.VanKoll@SWISSCOM.COM wrote:
>
> IŽd look why the got defined.
Local eletrical crash, even with no-breaks. After that, they become
just 'defined'.
> Did you run diag on those devices and their parents?
Yeah, and it really seems to be a hardware problem. Look the output of
the diag command:
--------------------------------
"A PROBLEM WAS DETECTED ON Wed Jun 19 17:52:33 GRNLNDST 2002
801014
The Service Request Number(s)/Probable Cause or Cause(s):
816-140: System Planar - operator panel display test failed.
60% OP panel Operator Panel Assembly
40% sysplanar0 00-00 System Planar
868-802: Error Log Analysis indicates a PCI SCSI-2 bus failure.
100% 04-A0 SCSI Subsystem
Use Enter to continue."
-----------------------------------
In this case, what must I have to replace on this machine??? Just the
PCI SCSI-2 bus or something more???
Thanks a lot,
Dilton.
>
> > -----Original Message-----
> > From: Dilton Dantas de Oliveira [mailto:dilton@POP-SE.RNP.BR]
> > Sent: Dienstag, 18. Juni 2002 13:59
> > To: aix-l@Princeton.EDU
> > Subject: CD-rom and tape drives do not turn available.
> >
> >
> > Hi All,
> >
> > I have a RS6K-F40 with AIX 4.3; I used the cd-rom and tape drives
> > normally, suddenly they turned into just 'defined'. I tried
> > to configure
> > them via smit to turn them into 'available', but I got an error:
> >
> > "Method error (/etc/methods/cfgsccd):
> > 0514-047 Cannot access a device."
> >
> > Does someone knows what is happenning and how to solve that?
> >
> > Thanks,
> > Dilton.
> >
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:00 EDT